Mining Rig Ventilation &
Airflow Planner in Uzbekistan
Calculate required cubic feet per minute (CFM) airflow rates, BTU heat output, fan configurations, and projected room temperature rise for GPU mining setups in Uzbekistan.
Rig Size Presets
Environment Parameters
Fan Configuration Recommendations for 180 CFM Target
| Fan Type | Max CFM | Noise Level | Fans Needed | Recommended |
|---|---|---|---|---|
| 120mm | 55 CFM | Low | 4× | — |
| 140mm | 90 CFM | Low | 2× | — |
| 200mm | 130 CFM | Medium | 2× | — |
| Industrial 200mm | 200 CFM | High | 1× | ◀ Best Match |
| Blower Fan Array | 400 CFM | Very High | 1× | — |
GPU Mining Rig Ventilation Guide for Uzbekistan
GPU mining rigs running 24/7 generate substantial waste heat that must be exhausted to prevent GPU throttling, premature hardware failure, and fire risk. The thermal design assumes approximately 0.15 CFM of airflow per watt of heat dissipated. A 6-GPU rig at 2400W requires a minimum 360 CFM of total exhaust airflow capacity.
In hot climates like Uzbekistan, ambient temperatures already near 35–40°C make thermal management even more critical. GPU core temperature targets for 24/7 mining should stay below 65°C for memory junction and 75°C for core temperature. Exceeding these shortens VRAM lifespan significantly, especially on GDDR6X memory found in RTX 3080/3090/4080/4090 cards.